High Ropes Inspections | Climbing Wall Inspections I Operational Inspections I Periodical Inspections

RCiT are certified to install & test anchors in accordance with EN 795 & BS 7883:2019

Installation

We can install anchors ranging from restraint anchors, fall arrest & work positioning anchors.

We typically work with either Glue in bolts (Petzl Bat'inox or Petzl Collinox) or Expansion bolts (Petzl Coeur bolt range).

Please contact us to discuss your requirements as we are happy to work with alternative anchors if your project requires such.

Testing

Widely known as the annual inspection, this should be carried out by an inspection body between 12 - 15monthly. For mass throughput courses, some operators deem a six month cycle.

What's included:

- Verify inspection regime & maintenance regime.

- Verify Opening checks are suitable and in place

- Verify Arborist report is in place

- Verify a PPE inspection regime is in place

- A full assessment of your course and all components

- A full alterations and amendments report (if required)

PPE Inspections

Personal Protective Equipment (PPE) makes up most of an activity centre / operators equipment and is integral to safe operation.

Following the requirements of EN 15567 - Part 2, the PPE (Personal Protective Equipment) Regulations, PUWER (Provision and use of Work Equipment) & LOLER (Lifting Operations & Lifting Equipment Regulation) all equipment must be checked regularly by a competent person.

Ropes Course Inspections & Training staff are all qualified Competent Persons.